Description: Satellite Finder with Analog Meter,Satellite Finder Meter,adjustable meter strength. Easily locate your satellite signal,Connects to your digital satellite line to easily calibrate the optimum signal. Satellite finder that helps to make precise dish set-up easily,its ultimate sensitivity will indicate 0.2 dB level difference in 950 to 2050MHz. When aligning a C-band dish do not use your meter in front of the dish to avoid full scale readings. Specification: Material: Plastic Size: 120mm Frequency range: .95GHz - 2.15GHz Freq Resp: 950 MHz-2050 MHz. 0.2 dB difference in 950 - 2150MHz range 13-18v DC LNB to REC connectors with a dB level control With LNB/LNB higher than 60 dB, use a 5dB attenuator. Package Includes: 1 Piece Satellite Finder 1 Piece User's Guide Note: When connecting to a LNBF with gain higher than 65dB, insert a 5dB attenuator between the meter and the LNBF. If a attenuator is not available you may use a long coax (60 feet or more) between the meter and the LNBF. If the meter needle is jumping the sensitivity is too high. Adjust the S.A. level on the back of the meter by punching through the label where marked,Be very careful not to damage the adjustment by turning it too far or too hard
