Description:
This repellers are used in garden or farm to repel rodent and s nake. They send out sonic w ave to frighten animals within 650㎡. Using them, you don't have to worry about pollution or food poisoning like what chemical method might cause. As the repellers are solar powered, there is no wiring needed. Just stick them into ground and you have your field protected.
Product Parameters:
Main Repelling Animal: S nake, Mice
Material: ABS Plastic + Aluminium pipe
Battery: 1.2V 600Ah
Sound W ave Frequency: 400Hz-1000Hz
Working Distance: Within 650 Square Meters
Waterproof Level: IP44
Applications: This product can be used in gardens, lawns, orchards, vegetable gardens and other places.
Size: 23.5*10.5cm (H*D)
How it works?
Solar powered repellent has been developedas a deterrent for many kinds ofanimals. It emits a pulsing buzzing into the surrounding soil. S nakes and some animals hardly hear airborne sounds but are sensitive to vibration. Most animals choose to avoid dange.
Features:
1. Changing vibration pattern helps deter animals that en counter the repellent again. The repellent vibrates at various time intervals in cycle(5s, 30s, 40s, 50s, 60s,120s), each vibration lasts about 4 to 10 seconds.
2. Built-in garden LED lights LED lights turnn automatically at dusk and when the solar panel is not being charged. They light up in 2 patterns: constant on steady (30mins) and flashing (30mins, flash once per minute).
Product Assembly:
1. The solar head and the vibration tube are shipped to you unassembled.
2. Look into the open end of the Vibration Tubed notice the cable. The cable end has a plug. Gently pull out the cable to access the plug.
3. Insert the plug from the Vibration Tube intoSolar Head. The repellent emits vibration immediately and starts to work.
4. Push the Solar Head onto the Vibration Tube.
5. Place the assembled Solan Repellent outside where it will receive sunlight or bright daylight on the solar panel for at least 4 to 5 hours a day. Allow one day for the internal battery to charge for the first use.
Installation Guide:
1. Place vibration tube 10-15 cm deep. Never force or hammer the device into the around.
2. Backfill with soil finely crumbled. Soak soil with water to set.
3. Place repellent no more than 25m apart. In sandy or rock y soil reduce to 10m.
4. Poor soil contact will cause a weak vibration and noisy operation. Avoid air gaps.
5. Vibration doesn't pass through buildings and hard substances like rocks & concrete.
6. Vibration doesn't jump deep cracks. Add extra repellents and avoid limiting your areacoverage.
Packing Included:
1 x Solar Energy Repeller
