ITEM NAME:100V-240V 50Hz Pir Motion Sensor Switch Ir Infrared Human Body Indction Sen A3B7 100V-240V 50Hz Pir Motion Sensor Switch Ir Infrared Human Body Indction Sen A3B7 1.Adaptive to filament, electricity saving lamp,2.This lamp is internal equipped with auto body sensor.If poeple come.the lam will power on;if people leave,the lamp will power off,3.Inner body auto sensor adopts infrared heat releasing device,and it can accurately capture moving low frequency signal and automatically power on, 4.When people leave,the lamp will auto dalay power off,convenient and energy saving,5.Inner side of the lap is set up with auto ambient brightness detecting circuit.Only when ambient brightness is lower than setting value,the sensor will receive sense and let the lamp power off.And it is energy saving Type:Biosensor Output:Switching Transducer Theory:Optical Sensor Usage:Position Sensor 1.Sensing Mode:PIR sensing + light control 2.Working Voltage:110-240V 50/60HZ 3.Output Way:Controllable Silicon 4.Out Power:Less than 40w 6.Sensing Distance:4-6m 7.Sensing Angle:110 degree 8.Sensitivity to light :darkeness 9.Extreme Temperature Using:-10 Celsius——+45 Celsius 10.Standby power consumption:Less than 0.1w colour:white Material:ABS size:3.5*2.5cm Package Contents: 1 x PIR Motion Sensor Notice: 1.When installing,please disconnect the power to guarantee safety 2.Don't apply it to overpower current or voltage 3.Don't install it accessible to water 4.Detection distance will change according to ambient temperature's difference.In summer,detection distance is short(it is obvious when close to human body's temperature);in winter, detection distance will be far 5.Don't install it in lower than -20 Celsius or higher than 60 Celsius 6.Don't expose it to sun 7.Don't install it in which there are moving objects 8.The first time power on ,there will one minute initiation;during this period,the device will shine,it is normal
