ITEM NAME:12.6V 40A Lithium Battery 18650 Charger PCB BMS Protection Board w/Balance #gib Product Description Description: Specification: Product model: HW-287 Charging Voltage: DC 12.6V-13.6V Continuous discharge current: maximum 40A (if heat dissipation environment is not good, please reduce the use of load current) Continuous charging current: maximum 20A Applicable Choice: For lithium batteries with nominal voltage of 3.7V and full charge of 4.2V (including 18650, 26650 and polymer lithium batteries), with electric drill below 170W. Product size: 60mm*40mm*2mm/2.36*1.57*0.07'' Packing weight: 12g Warm Tips: 1. Successful start-up of the drill requires three 10℃-20℃ power batteries or six 5℃-10℃ power batteries (recommended power battery models: for SONY VTC4, VTC4A, VTC5A, VTC6), 0 V and 12.6V connections, using copper wires over 3 square millimeters (no nickel sheets). 2. Strict wiring 0V, 4.2V, 8.4V, 12.6V. When welding wire, no element on board can be touched. Note: Please allow 1-3cm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand. Included: 1 X Li-ion Battery Charger Protection Board.Strict wiring 0V, 4.2V, 8.4V, 12.6V. Due to the different display and different light, the picture may not show the actual color of the item. 12 months Warranty. If item is defective after 3 months, you can still send it back to us.
