Feature:
Car power pumping oil pump/pump/more replacement oil pump, self-priming pump.
The car power, using a 12V mini self-priming pump,
diy replacement car engine oil, save cost, easy operation,
as long as the electric start the oil pump, insert the plug into the cigarette lighter
can avoid using clip the trouble of power supply is connected.
Oil pump with connector, install and use is very convenient, also facilitate placement.
This pump can pump oil not only, also can pump hydraulic oil, edible oil, etc.
Specification:
Head: 20m
Cable Length: 1m
Rated voltage: 12V
Rated power: 45W
Clips Length: 8cm
Biggest suction: 2.0 meters
PVC pipe: 1.1m(Dia.: 11mm)
Nylon pipe: 1.4m(Dia.: 6mm)
Maximum pressure: 0.8 MPa
Maximum flow: 4.0L/minute for medium (water)
Brass pipe: 70cm Brass Pipe+40cm PVC Pipe(Dia.: 5mm)
Suitable: Diesel, engine oil, hydraulic oil, etc.
Tips:
Pls use when the engine is warm, the engine oil is warm and viscosity is lower, this will be easier and faster to pump
Please clean the pump after each use
Powered by car battery with 2 clips
Note:
Please allow 1-3mm error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 X Oil Pump
1 X 6mm Nylon pipe
1 X 11mm Output PVC pipe
1 X 5mm Brass pipe
1 X Clip wire with switch
