ITEM NAME:12V One Way Remote Control Switch Receiver Module RF 433MHz Transmitter #gib Product Description Description: Technical parameters: Working voltage: AC12V Rated current: 7A Receiving frequency: 433MHZ Receiving sensitivity: -98db Remote control matching: Press the remote any button, and if the learning indicator flashes, the remote control can be used to learn the matching product. 1. Clear: always long press the learning button, the indicator light will be on, after 5 seconds the light is out, indicating successful. After clearing, the previous remote control no longer works. Note: if has been set up before the factory, then no need to clear! 2. Select the working mode: hold on the button after the operation of clearing. After two seconds, the indicator light flash 1 time and release to choose the interlock. If the indicator light flash 2 times and release to choose the self-locking; If the indicator light flash 3 times and release to choose the point action. 3. Matching the remote control: choose working method, press on the learning button, the indicator light brighten, loosen your hands, according to the remote control and transmit signal, the indicator light flash 3 times, indicating matching is successful. If you need match more remote control, you can re-operate this step. Note: This product apply to fixed code remote control and learning code remote control. Remote control with different address codes maximum is 16, if exceed 16 then the first one don't work, and so on; The same kind of fixed code remote control, just need to type the same address code as the finished remote control, can match with any remote control(no quantity limit); Learning code remote control, operate according to the third step If you find that other people can also control your remote control switch(repeated code), first you need to clear, and then change the remote control switch to another address code. Included: 1 x Remote Control.Receiving frequency: 433MHZ. Select the working mode: hold on the button after the operation of clearing. Clear: always long press the learning button, the indicator light will be on, after 5 seconds the light is out, indicating successful.
