ITEM NAME:1x ICL8038 Low/Medium Frequency Waveform Signal Generator Wave Signal Source Hot Descriptio n Description: The LC ICL8038 module is designed for common frequency ranges. It is adjustable from 5 gears and generates low-distortion triangular waves, square and sine waves from 10Hz to 450KHz. Sine wave can be used for test signals, drive signals, carrier frequency signals, etc; square wave can be used for switching signals, trigger signals, etc; triangular wave is mainly used for scanning signals. Functions: VCC,GND: Working Voltage AC: With DC Bias Output G: Ground DC: Pure Signal Output R11: Frequency Adjustment R12: Square Wave Duty Cycle Adjustment R13: Sine Wave Linear Adjustment R14: Amplitude Adjustment R15: Square Wave Linear Adjustment Jumper P2: Select Different Waveforms(Triangular, Square Or Sine Waves) Jumper P3: Select Different Frequency Ranges 10Hz-450Hz 90Hz-1.5KHz 940Hz-15KHz 6KHz-120KHz 20KHz-450KHz Specifications: Working Voltage: 12V ~ 15V Output: Triangular Wave, Square Wave And Sine Wave. Frequency Range: 10HZ ~ 450kHz Low Distortion Sine Wave: 1% Duty Cycle Range: 2% To 98% Low Temperature Drift: 50ppm / Â ° Triangular Wave Output Linearity: 0.1% Working Temperature: 0 ~ 70 Â ° Board Size: 54.5*37.8mm Package Included: 1 *Â ICL8038 Low/Medium Frequency Signal Generator Note: 1.Due to the manual measurement and different measurement methods, the actual size could be slightly different. 2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different. Whatever the ending's perfect or not, you can't disappear from my world 1x ICL8038 Low/Medium Frequency Waveform Signal Generator Wave Signal Source Hot.The LC ICL8038 module is designed for common frequency ranges. It is adjustable from 5 gears and generates low-distortion triangular waves, square and sine waves from 10Hz to 450KHz. Sine wave can be used for test signals, drive signals, carrier frequency signals, etc; square wave can be used for switching signals, trigger signals, etc; triangular wave is mainly used for scanning signals.
