Description:
This meter can be set by pressing the battery type: lead-acid batteries, lithium batteries,
nickel-metal hydride batteries, but also by pressing the key to set the number of batteries (battery in series)
This meter is suitable for: 12V, 24V, 36V, 48V, 56V, 60V, 64V, 72V, 84V battery car, electric car, battery pack, balance car, inverter, electric forklift, sightseeing car, electric car, car battery, battery power Mobile devices, etc., can also be used for other voltage, power test purposes.
This meter can be tested to show real-time voltage, power, and percentage of electricity
Display mode optional: single display voltage; single display percentage power; voltage, percentage power cycle display (default)
Two-wire system, wide supply voltage, wide test voltage: DC6-120V, wiring is simple and convenient
With reverse protection function, reverse will not burn
Low power flash alarm alarm function
LED color display, high-grade atmosphere
Specification:
Supply voltage: DC6-120V (wide range),
Note: The maximum input voltage can not exceed 120V, otherwise there is the risk of burning
Test voltage: DC6 ~ 120V (decimal point automatic movement)
100V or less when the minimum resolution: 0.1V
100V or more when the minimum resolution: 1V
Power Resolution: 1%
Operating current: <20mA
Display: LED color screen
Overall dimensions: L54 * W30 * H21mm
Installation openings: 47.2 * 27.3mm
Measurement rate: ≥500mS / times
Voltage measurement accuracy: 1% (± 2 words)
Lead length:> 150mm
Note:
This tester for Lithium and lead-acid batteries Universal ,
the factory default setting for 12V lead-acid battery power and voltage cycle display,
If you need to test other specifications can be re-set by yourself.
Instructions:
1. Pull the white button on the backside for about 3s until it shows “1-U” and release it.
Pull it again for 1s it shows “2-b” and release it. Pull it again for another 1s it shows “3-c” and release it.
Pull it again for another 1s it shows “4-d”.
2. When it shows “1-U”, pull the white button for 3s then you can adjust the voltage admeasuring apparatus.
Pull it for a longer time, the voltage goes up. Then pull it for another longer time, the voltage goes down.
Do it again and again. To save and exit Automatically after the screen is twinkling.
3. When it shows “2-b”, you can change the type of battery.
12V: 1pc 12V Lead-acid battery
3.7V: 1pc 3.7V Lithium polymer battery
3.2V: 1pc 3.2V Lithium iron phosphate battery
1.2V: 1pc 1.2V NiMH battery
4.When it shows “3-c”, you can adjust the number of batteries.Please refer to the following:
12V Lead-acid battery: 1-8pcs
3.7V Lithium polymer battery: 2-28pcs
3.2V Lithium iron phosphate battery: 3-32pcs
1.2V NiMH battery: 10-70pcs
5. When it shows “4-d”, you can adjust the display mode. “V” is voltage mode. “%” is percentage mode. “V %” is voltage& percentage cycle mode.
Package Included:
1 X Battery Voltage
