ITEM NAME:2016 new USB2.0 VHS to DVD Converter, convert analog video to digital format ME Hardware Installation (1)Before you first connect the EasyCAP USB 2.0 Video Capture with Audio to your computer, please insert the “Software CD-ROM†into your CD drive. Select the option “Installâ€. When “Completing the Found New Hardware Wizard†window appears click the “Finish†button to complete the driver installation. Note: If any further components are found please repeat the above process until you receive the message “Found new hardware : Your hardware is installed and configured useâ€. (2)You will now need to check that The drivers are installed correctly. Connect the EasyCAP USB 2.0 Video Capture with Audio to your computer, Right Click on My Computer and Left Click on properties. Click on hardware tab and then Device Manager.In the Device Manager click on the +imaging devices correctly you should see the “OEM caputerâ€. If it has a Yellow mark next to it then this means that the driver is not installed correctly. You will need to remove the driver and disconnect the EasyCAP USB 2.0 Video Capture with Audio from the computer and reconnect is to install the driver again. Software Installation When insert the CD-ROM into your computer, and select “Installâ€. In the next windows, and click “nextâ€. â€I accept the.USB 2.0 Video Grabber with Audio, it can capture High-quality video and audio file direct by USB 2.0 interface without sound card. However, the installation is very simple and the external power is unnecessary.
