ITEM NAME:20PCS 10mm 2 Pin Single Connector Adapter cable For 5630 5050 LED Strip Lig K9X8 20PCS 10mm 2 Pin Single Connector Adapter cable For 5630 5050 LED Strip Lig K9X8 This is an extremely easy-to-use connector for single color LED strip light. Even not professional, you can easily handle it. It can be used as strip to strip connecting or re-joining cut strips. For waterproof strip light: you need to sweep off the silicon first (be aware not to cut through the circuit board). Then open the connector and lock the strip under the plate. For non-waterproof strip: just cut the strip as you need (cut every 3 LEDs), then open the connector and lock the strip under the plate. Everything finished in a few minutes without soldering. BTW, make sure to match the positive(+) and negative(-) marks on both strips.If you feel there is a loose connection, thicken your strip light by adding an extra chip in between and make sure the built-in soldering point touches your strip light tightly. Color: Black + red Length: about 15cm Connecting point: 2 pins single color Material: plastic Package Contents: 20 * Connector Cable Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm..For waterproof strip light: you need to sweep off the silicon first (be aware not to cut through the circuit board). Then open the connector and lock the strip under the plate. Even not professional, you can easily handle it.
