ITEM NAME:3.5 Inch Tft Lcd Screen Lcd Display Capacitive Contact Screen Module 480X32 K9B6 ☆★ Product Details ★☆ 3.5 Inch Tft Lcd Screen Lcd Display Capacitive Contact Screen Module 480X32 K9B6 3.5-inch color screen, support 16BIT RGB 65K color display.320 × 480 resolution, clear display With capacitive Contact screen for 5-point Contact .Support 8-bit/16-bit parallel data bus mode switching (16 bits by default) Military-grade process standards, long-term stable work.Support punctual atom full range of development board inline, provide routines Provide STM32/C51 source code, WIKI data online update.Provide underlying driver technology support Contact screen type: capacitive Contact screen (maximum support for 5 Contact ) Driver chip: ILI9488 Effective display area (AA area): 48.96x73.44 (mm) Contact IC: GT911 Module PCB backplane size: 56.41x97.60 (mm) Working temperature: -10 ° C ~ 60 ° C Storage temperature: -20 ° C ~ 70 ° C Working voltage: 3.3V / 5V Power consumption: to be determined Product weight (including packaging): 57g This module is compatible with the punctual atom STM32 development board. The specific usage is as follows: Step 1: Download the test program Download the STM32 test program from the program download bar For a description of the relevant test procedures, please refer to the test program documentation in the package. Step 2: Connect the STM32 development board Locate the TFTLCD socket on the development board, and match the module pins to the socket pins (for example, the CS pin of the module corresponds to the CS pin of the slot), and then insert it directly into the slot. Step 3: Compile and download the program to the development board Compile and download the program you need to test to the STM32 development board, (will not compile and download?) Step 4: Observe the running of the program After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs succe