Item Name: 3.7V Human Body Infrared Sensor Kitchen Cabinet Light Circuit Board Switch. Smart TV Box Android Quad Core HDMI 1080P Wifi Streaming Media Player UK
DC 3.7V Human Body Infrared Induction Closet Light Circuit Board Sensor Control Switch Panel for Kitchen Cabinet Lights
Feature:
Refresh overlap:If the sensor detects the signal again within 5 seconds before the lights go out, the delay will be increased once the setting time.
Use: Applicable to lighting category. The light automatically turns on when people come. After reaching the delay time, the light will be turned off automatically if no model is detected.
Specification:
Working voltage: constant voltage power supply: DC3.7V2V universal
Sensing distance: 1-5 meters (high temperature / strong light / strong wind affect the distance)
Sensing angle: the maximum cone angle 120 angle the greater the distance becomes shorter
Principle: Passive infrared induction detection
Maximum load: the highest load up to 10A, recommended 8A within the use of
Delay time: adjustable delay time
Default single delay time: 42 seconds
Material: PC + ABS
Size: 52*11*1.2mm/2.05*0.43*0.05in
Pay attention to the top of the matter:
1. The bottom of the controller must be well insulated sealing treatment.
2. If the light source and the sensor are very close, you need to cover the sensor with a milky PVC or acrylic mask. Leave only the upper part of the lens exposed, so as to avoid the sensor by the strong light interference caused by false action.
3. The use of power supply voltage can not exceed the upper limit of 25v or it will damage the IC.
4. Hanging set of lenses need to be stuck in place, otherwise it will reduce the sensitivity of induction.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
