Size: 1.8 inch SPI serial bus
Resolution: 128*160
Driver IC: ST7735
1. Support various MCU in-line without any wiring
2. Integrated voltage regulator IC, support 5V or 3.3V power supply
3. On-board level conversion scheme, truly compatible with 5V/3.3V IO level, supporting various microcontroller IO connections
4. Integrated SD card expansion circuit,
5. Reserve SPI FLASH font circuit to facilitate extended application
Technical Parameters:Display color: 16BIT RGB 65K color
Size: 1.8 (inch)
Type: TFT
Driver chip: ST7735S
Resolution: 128 * 160 (Pixel)
Module interface: 4-wire SPI interface
Backlight: 2 White Led
Effective display area: 28.03x35.04 (mm)
Module PCB size: 38.30x62.48 (mm)
Working temperature: -20 ℃ ~ 60 ℃
Storage temperature: -30 ℃ ~ 70 ℃
Working voltage: 5V / 3.3V
Weight (including packaging): 18 (g)
Pin Description:
| Number |
PIN |
Description |
| 1 |
VCC |
LCD screen power supply (3.3V ~ 5V) |
| 2 |
GND |
LCD screen power ground |
| 3 |
GND |
LCD screen power ground |
| 4 |
NC |
No definition, reserved |
| 5 |
NC |
No definition, reserved |
| 6 |
NC |
No definition, reserved |
| 7 |
CLK |
LCD screen SPI bus clock signal |
| 8 |
SDA |
LCD screen SPI bus write data signal |
| 9 |
RS |
LCD screen register / data selection signal, low level: register, high level: data |
| 10 |
RST |
LCD reset signal, low level reset |
| 11 |
CS |
LCD chip select signal, low level enable |
Package includes:
3 x LCD module
