Description: 4.3Inch 4 Wire Resistive Touch Screen Panel Digitizer 105x67mm Screen structure: ITO Film is bonded to ITO Glass with DOT point isolation Destructive resistance: 3-12mm special process fully tempered optical glass as the substrate. Use 1 lb. at 130 cm height to freely fall to the center of the glass without damage to the glass. Sealing characteristics: The high sealing material tightly closes the filter device, the frame and the riot glass to prevent liquid leakage Durability: Mohs hardness 3H (according to ATSM D3363 standard) Specification: Connector: 2.54mm pitch, standard AMP87499-9 Touch media: fingers, gloved hands, pens, credit cards, etc. Screen thickness: 1mm Screen size: 4.3inches Resolution: 4096x4096 Response time: less than 6 milliseconds (finger input) Touch force: 15-40gr using a hardness of 600 diameter 16mm silicone grease Conversion speed: less than 20ms Position accuracy: standard deviation less than 2 mm M touch density: touch resolution 4096x4096 touch point Screen error: less than 1.5% Supply voltage: DC+5V Screen resistance: 100?-450? (between X1-X2); 350?~1000? (between Y1-Y2) Insulation resistance: greater than 20M? at DC25V Electrostatic protection: can withstand 20 discharges of 15 kV voltage randomly distributed on the screen surface (per IEC 801-2; 150pF and 150?) Transmittance: 75-85% (when the wavelength is 550 nm) Working temperature: -10 ° C -60 ° C Storage temperature: -20 ° C -70 ° C Operating humidity: 90% RH at 40 ° C (no condensation) Storage humidity: 90% RH at 40 ° C (no condensation) Sealing: Meets NEMA4 and IP65 standards High temperature storage: test at 80 ° C for 240 hours Low temperature storage: 240 hours test at -25 °C Service life: single touch is more than 1 million times Package Includes: 1 Piece 4.3Inch Resistive Touch Screen Panel Digitizer
