ITEM NAME:433MHz 1 CH Wireless Relay RF Remote Control Switch Receiver Transmitter 12 O5C4 433MHz 1 CH Wireless Relay RF Remote Control Switch Receiver Transmitter 12 O5C4 Working/output way: 1. Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control. 2. Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control. 3. Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control. 4. Delay: Press remote control 's one button,relay is working,release the remote control and begin timekeeping,after 5s/10s/15s will automatically close the relay. Color: green Material: Metal plastic Wireless Remote Control: Battery:23A Battery (Battery is not included) Operating voltage: 12V Frequency: 433MHZ Reference distance: 150 meters (This is the theory distance in open environment without interference, practical application due to the interference environment and decreased) Current job: 9 ~ 12mA Transmitting power: 10-15mw Frequency deviation: +/- 0.2MHz Size (LxWxH): 58x38x15 (mm) 1 Channel Wireless Relay Switch: Input Voltage: DC10-14V Standby Current: Less than 5MA RF Frequency: 433MHZ RF Working mode:Super heterodyne receiver Receiver Sensitivity: Greater than 90dBm Remote Control Distance: Greater than 100 meter(In open environment) Decoding Way: MCU Software decoding Can store the number of remote control:50 Support remote control type: Fixed code, learning code Channel: 1CH Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off) Wiring Method:Fixed wiring terminal Working Voltage: DC12V Output Current: 10A Rated load: 10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC Output:Normally open,Common,Normally closed Dimension:3.5cm*3cm*1.6cm Package included: 1 x Wireless R
