ITEM NAME:4pcs 110cm Digital Multimeter Test Lead Probe Cable SMD SMT Needle Tip 1 UVY Descriptio n Description: 1. The wire is super soft and has stronger tensile strength. 2. Crosshead plug Measurement Method: 1. Measurement of AC and DC voltage: Set the range switch to the appropriate range of DCV (DC) or ACV (AC) as needed. Insert the red test lead into the V/ÃŽ © hole, insert the black test lead into the COM hole, and connect the test lead in parallel with the line under test. The reading is displayed. 2. Measurement of AC and DC current: Turn the range switch to the appropriate range of DCA (DC) or ACA (AC), insert the red test lead into the mA hole (<200mA) or 10A hole (>200mA), insert the black test lead into the COM hole, and connect the multimeter in series. It can be in the circuit. When measuring DC, the digital multimeter can automatically display the polarity. 3. Measurement of resistance: Turn the range switch to the appropriate range of ÃŽ ©, insert the red test lead into the V/ÃŽ © hole, and insert the black test lead into the COM hole. If the measured resistance value exceeds the maximum value of the selected range, the multimeter will display 1, and a higher range should be selected. When measuring resistance, the red test pen is positive and the black test pen is negative, which is the opposite of the analog multimeter. Therefore, when measuring polar components such as transistors and electrolytic capacitors, you must pay attention to the polarity of the test leads. Specifications: Material: Copper For The Needle (Gold Plated Surface), Needle Bar: Plastic, Wire: Bvc Plastic Multiple Strands Of Thin Copper Wire Color: Red, Black Size: 110cm (1000V 20A) Package Included: 4 * Test Lead (With Pen Holder) We offer you what you need! 4X 110cm Digital Multimeter Test Lead Probe Cable SMD SMT Needle Tip 1000V 20A.It can be in the circuit. Turn the range switch to the appropriate range of ÃŽ ©, insert the red test lead into the V/ÃŽ © hole, and insert the black test lead into the COM hole. Size: 110cm (1000V 20A). Set the range switch to the appropriate range of DCV (DC) or ACV (AC) as needed.
