ITEM NAME:50 Miles Digital Indoor Antenna Receiver Analog Antena Amplifier for HDTV A#S Product Description Description: 50 Miles Digital Indoor TV Fox Antenna Receiver Analog TVFox Antena Amplifier for HDTV Aerial Feature: 1. Innovative flat, razor-thin antenna design. 2. It has high gain and low error rate digital TV signal reception,and a significant signal enhancement in actual use. 3. Increase the reception of TV programs, and eliminate the pause the mosaic images. 4. Multi-directional design pulls in signals from all directions. 5. Fast and easy to set up -Unwrap,plug it in and Scan channels. 6. You can put it on the wall, on the table or on the window (strongly recommended) and it will make you enjoy watching crystal clear digital &HD shows with many opportunities. Set up guide: Step 1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converter Box. Step 2: Hand held the antenna, near the window, place it horizontally or vertically. Step 3: In the TV's or STB's setup menu, set the tuner mode to "Antenna"  or  "Air" For more detailed instructions, please refer to your TV manual. Step 4: In the TV' s or STB's setup menu, set TV to "scan" for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions. Step 5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal position is found. Adjustment of antenna directions Connect the antenna to TV properly. Set TV to Antenna mode. When the signal quality is low, adjust the location of the antenna or rotate it towards television station. you an watch the clear TV program until the signal quality gets improved. Warm Tips: 1. For the best reception, please check the following tips. 2. This digital HDTV antenna is intended for indoor use only. 3. Placing the antenna.This digital HDTV antenna is intended for indoor use only. Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converter Box.
