ITEM NAME:500mA Mini Solar Lipo Charger Board Lithium Battery Charge DIY Module Kit #gib Product Description Description: Feature: 1. This is a super mini solar Lipo charger based on a single lithium battery charge management chip CN3065. 2. This solar charger allows you to get the most possible electricity from solar panels or other photovoltaic devices and access rechargeable LPIO batteries. 3. It's also easy to set up. Just insert the solar panel into one side of the solar charger and the battery into the other side, you can start charging. 4. The output of the solar charger is designed to charge a single polymer lithium-ion battery. The load should be parallel to the battery. 5. By default, solar charging is set to a maximum charging current of 500 mA and a maximum recommended input of 6 V (minimum of 4.4 V). It is recommended that the battery charge should not exceed the rated capacity. Specification: Solar panel input: 4.4-6V Maximum charging current: 500 mA Interface: 2-pin JST connector (or pH 2.0) Short circuit protection Continuous charging current up to 500 mA Battery status indication (red: charging, green: charging) Supporting USB Charging (Micro USB Connector) Size: 20mm*40mm/0.78*1.57'' Weight: 4g Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding. Included: 1 X 500mA Mini Solar Lipo Charger Board.It's also easy to set up. The load should be parallel to the battery. Solar panel input: 4.4-6V. Interface: 2-pin JST connector (or pH 2.0). Short circuit protection. Battery status indication (red: charging, green: charging).
