ITEM NAME:6m hose 6pcs mist sprinkler Outdoor Garden Misting Cooling System Mist Nozz R1Z6 6m hose 6pcs mist sprinkler Outdoor Garden Misting Cooling System Mist Nozz R1Z6 Installation steps: 1. It is recommended that the misting system be installed at the height of 2.5m-3m. 2. Connect the adapter to the water tap. 3. Turn on the water tap and wash the system for 1 minute and remove the impurities. 4. Screw the spray nozzle onto the tee parts, except for the end one. 5. Turn on the water tap and clean system for 2 minutes to make sure the system is completely cleaned. 6. Close the water tap and install the last nozzle to the joint and use the end cap. 7. Fix the misting hose by a cable belt saddle clamp. 8. Turn on the water tap until the sprayer works and enjoy the cooling misting system. 9. When no need to use the misting system for long time, close the nozzle and keep it dry and clean. This series of nozzles does not require air assistance, the system is simple, spray a fine mist, sufficient atomization, has the advantages of energy saving, water saving, low cost and good effect. spray sheet is processed by advanced forging technology, strong durability, the working life is about 2.5 times compared with similar products. The nozzle can be completely atomized by the pressure of the tap water, and the effect of using the high-pressure water pump is better Application range: 1. Wetting and rust removal 2. Air humidification 3. Chemical treatment 4. Chemical spraying 5. Liquid spraying 6. Tobacco leaf humidification 7. Tablet coating 8. Flue gas evaporative cooling 9. Disinfection 10. Unit cooling 11. Fruit wax spray 12. Ceramic tile glazing 13. Factory humidification 14. Salt fog test 15. Artificial fog 16. Humidification in other places colour: black material: plastics size: Length: approx. 6m/19.68ft Package Contents: 1 * tube 6 meters (3 meters ahead, 3 meters behind the nozzle) 1 * faucet connector 1 * positive three links 6 * clips 15* pipe cl.Fix the misting hose by a cable belt saddle clamp. Turn on the water tap until the sprayer works and enjoy the cooling misting system. Connect the adapter to the water tap. Close the water tap and install the last nozzle to the joint and use the end cap.
