ITEM NAME:6Pcs Aluminum Glue Puller Tabs Car Body Dent Repair Hail Removal Tool PAD ME How to use this paintless dent repair kits? 1.Clean the dent with a clean wet cloth; 2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is). 4. Pull the trigger and apply the drawing gasket with extruded glue. (The 4 holes of gasket should be applied with hot melt glue). 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres. (Let the glue cool for about 8 minutes.The cooling time should be less than 10 minutes and should be shorter slightly in winter). 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent. 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen. 8. Clean the repaired place with a clean wet cloth. Material：Aluminum Color:Silver Size: 35mm 32mm 31mm 25mm 22mm 21mm Package Include: 6 pcs Aluminum tabs Note: 1.Please allow 1-3cm differences due to manual measurement, thanks. 2.Please understand because of the light irradiation or computer display difference, so I can't guarantee photos and real color is 100% the same..Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;. Clean the dent with a clean wet cloth;. How to use this paintless dent repair kits?.
