ITEM NAME:Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Truck â„–[ Description This adjustable equipment allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. In-Kind Shooting ! Instructions for use: 1. Remove the four-wheel positioning sensor (fixture), remove the tire 2. Carefully suck the magnetic gauge tool on the side of the brake wheel 3. Adjust the gauge tool to zero 4. Installed the required positioning special parts 5. Use special tool, with the help of magnetic gauge tool's degree instruction to adjust the positioning parts to the required measurement angle 6. If there is a little deviation when re-test with the positioning tool, just fine-tune at the bottom of the car. (Generally a little deviation does not cause positioning failure) Fast.Suitable for accurate checking of the castor and camber angle. In-Kind Shooting ! Carefully suck the magnetic gauge tool on the side of the brake wheel. Magnetic gauge attaches to the hub or disc brake.
