ITEM NAME:Aluminum Alloy Paintless Dent Repair Pulling Bridge Professional Car Dent R B7S9 Aluminum Alloy Paintless Dent Repair Pulling Bridge Professional Car Dent R B7S9 Steps for usage:Clean the concave surface.The glue stick is inserted into the high-performance glue gun, and then plugged in and heated. After a few minutes, the glue stick will be dripped. The working temperature of the glue gun is about 165~200 degrees. Please use special high temperature glue gun to pay special attention to safety and keep away from children. 3. Depending on the size of your body sheet metal, select the size of the gasket, and apply the gasket at a time to determine your choice. Using a heated glue gun, squeeze the spread glue stick evenly over the surface of the gasket and quickly place it slightly in the recess for 3 minutes. Note: Do not apply pressure when placed slightly in the recess. After use, the gasket can be reused after cleaning. Do not discard! Use the balance bridge. In the operation according to your recess size adjustment, the force must be slowly adjusted until the recess is completely flattened and restored. Spray the debonder at the bonding point of the gasket and the super-treatment glue and gently remove the residual super-treatment glue with the film.Note: Repeat the inspection of the depression to repeat the steps 3-4-5, it is important to completely complete the depression. Wipe the surface clean and almost invisible after repair. Brand Name:Other Model Number:Pops A Dent Type:Combination DIY Supplies:Metalworking Application: tools paintless dent repair Function:repair the dent of your car Size: (approx.) Length: 15 cm/ 5.91 in Diameter of round suction cup: 3.5 cm/ 1.38 in, 3 cm/ 1.18 in, 2.6 cm/ 1.02 in, 2.2 cm/ 0.87 in Diameter of oval suction cup: 3.2 cm/1.26 in, 3.1 cm/ 1.22 in colour:black Material:Aluminum alloy + plastic Package Contents: 1 * Balancing Bridge Puller Tool Kit Only the above package content, other products are not included. Note:
