ITEM NAME:Analog Pointer Multimeter Multitester AC DC Volt Ohm Frequency Current Testing Descriptio n Description: Features: 100% brand new and high quality. Fine workmanship and long service life. Easy to use and durable in use. This instrument is portable mutitester designated for measurement of weak current circuits. With One Pair Test Pen. Overload function. OPERATION TEST: - Plug the test leads into COM and + sockets. - Place the range selector to a prescribed range position. - Short the test leads and turn 0A DJ to set the poin-ter to zero position. - Make sure that there is no voltagea crossthe circuit to be tested. - Connect the test leads to the tested resistor and read the scale in accordance with the reference table. - CONTINUITY TEST (BUZZ) Set the range selector knob to BUZZ,apply the test lead pins to two points to be tested and test continuity.Then the buzzer will buzz at between 0 and about 120 .It is impossible to test a point where voltage is being applied. - CONTINUITY TEST (LED). Set the range selectot to the"CONT'Y" position.Connect thetest leads to the tested circuit if the"LED" in the tester produce light ï ¼Å’that mean the tested circuit is continuous. Specifications: Model: YX - 360TRNB Color: See Picture DCV: 0.25 / 2.5 / 10 / 50 / 250 / 1000V ACV: 10 / 50 / 250 / 100V DCA: 0 - 0.5 - 50 - 500mA Ohm Meter: X1 / x10 / x100 / x1K(2k /20k2M) Decibels: -10dB to + 22dB (for 10VAC) Intermal battery: 9V x 1 + 1.5V x 2ï ¼Ë†No Includeï ¼â€° Package Dimensions (L*W*H): 150*128*40 MM / 5.91*5.04*1.57 Inches Notice: please read the instructions before using Package Included: 1 x Multimeter 1 x Manual 1 Pair Test Pen Note: 1.Due to the manual measurement and different measurement methods, the actual size could be slightly different. 2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different. Whatever the ending's perfect or not, you can't disap.CONTINUITY TEST (BUZZ) Set the range selector knob to BUZZ,apply the test lead pins to two points to be tested and test continuity.Then the buzzer will buzz at between 0 and about 120. We'd like to settle any problem in a friendly manner.
