ITEM NAME:Arduino Mega 2560 PRO MINI Embedded, MCU ATmega2560, USB CH340G 2018 LJ MEGA 2560 PRO Fully compatible with Arduino IDE. The EMBEDDED version of Mega 2560 CH340G/ATmega2560 - compatible with Arduino Mega 2560 board. Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G. Ultra-compact size 38x55mm. It is a good solution, to make your final project on solder proto-board. Board for functionality similar to the Arduino Mega 2560. It is embedded board, but the same stable, and uses the original chips ATmega2560 (16 MHz). The board used the chip CH340G as converter UART-USB. When you work in the frequency 12MHz, giving a stable result of data exchange (need install drivers to computer). Mega PRO (Embed) 2560 CH340G / ATmega2560 - connects to the computer via micro USB cable (used for almost all Android smartphones). You can supply power to board through the MicroUSB connector or to power pinheaders. The voltage regulator (LDO) can deal with incoming voltage from 6V to 9V (peack 12V) DC. Output current for 5V - about 800mA, for 3.3V - about 800mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects. Detail page of product: https://robotdyn.com/mega-2560-pro-embed-ch340g-atmega2560-16au.html On detail page, you can find: Schematic: (PDF) PinOut Diagram: (PDF) - (JPG) Mechanic Diagram: (PDF) - (JPG) Driver: (Win) - (Linux) - (Mac OS) -(Android) Instruction(PDF) for installation Library for Eagle CAD Technical Characteristics: Microcontroller ATmega2560 Operating Voltage 5V Input Voltage (recommended) 6-9V Input Voltage (limit) 12V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current for 5V Pin 800 mA DC Current for 3.3V Pin 800 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz LED_BUILTIN 13 Length 55 mm Width 38 mm Weight 17 g.The board used the chip CH340G as converter UART-USB. Ultra-compact size 38x55mm. It is a good solution, to make your final project on solder proto-board. Fully compatible with Arduino IDE. EEPROM 4 KB.
