ITEM NAME:Arduino Set ESP8266 Weather Station for Arduino IDE IOT Starter English TutS Ew Details: Weather station uses the ESP8266-12E to retrieve data from the Internet: time of a city, weather data and forecast information for the next three days, scrolling on the OLED display SSD1306; the device can switch to display data from any city in the world- maybe your relatives or friends live there The device uses DHT11, BMP180, BH1750FVI sensors to capture temperature, humidity, atmospheric pressure and light data. The weather station reads data from inside the building every five seconds by sensor and uploads it to the Internet every 60 seconds. You can view real-time data tables from your phone or computer CP2102 chip inside, microUSB, 4-MB flash, full E/ A port and wireless 802.11-supported IOT platform Arduino-compatible. DHT11 sensor: A digital signal output with a calibrated temperature and humidity sensor. The simple communication protocol significantly reduces programming effort BMP180: a high-precision, small pressure sensor with low power consumption of 3 mA. Its excellent performance can achieve the absolute accuracy of the lowest value 0,03 hPa. 300 ~1100 hPa. BH1750FVI: Digital light intensity tssensor. Direct Digital output, no complex calculations, no calibration. OLED-Yellow-Blue display: 0,96 "SSD1306 128X64 Yellow and Blue-OLED LCD display with I2C IIC SPI Serial We have weather station hardware prepared. And 50M manual, demo code, fuel tools, necessary Class libraries. -Download link label is inserted at the bottom of the packaging box. Or.Step 2: Install Arduino IDE for ESP8266. Step 3: Burning Firmware to ESP8266. Ai-Thinker with ESP8266 DOUT 8Mbit v1.5.4.1-a 20171130. ESP8266 Flasher.exe. CP2102 chip inside, microUSB, 4-MB flash, full E/ A port and wireless 802.11-supported IOT platform Arduino-compatible.
