ITEM NAME:Car Anti-Static Belt Strap Car Safety Ground Wire Reflective Earth Belt Sta M8Z2 Car Anti-Static Belt Strap Car Safety Ground Wire Reflective Earth Belt Sta M8Z2 Name :Electrostatic Belt Fan section It is made according to the principle of electrostatic belt for dangerous goods such as oil filling and gas filling, which effectively removes static electricity from the surface of the car. It can be adjusted in Long and short, and after the static belt is naturally worn, it can be lowered and used. (adjust bolt fixing plate) Copper wire grounding removes static electricity more efficiently. It effectively avoids the phenomenon that the other network and chain static belts are dirty by dust and then the static electricity is poor. more wear-resistant and has a longer service life. Method of use: Installed on the exhaust pipe at the rear of the car, first wipe the place where the exhaust pipe is in contact with the hoop to remove the rust. Put the clamp on the exhaust pipe (if the exhaust pipe with the tail throat is encountered, the clamp can be opened), the hook is hung on the clamp, and the screw is tightened (to ensure that the bottom of the rubber belt Presses the ground.). If the bottom of the tape does not Press the ground or the rubber band becomes shorter after a period of use, open the adjustment plate to adjust the length so that the rubber band Presses the ground. After the installation of the static belt, the bare copper wire at the bottom will be leveled within a few days. there is no need to worry about this. the rubber Presses the ground, and the copper wire inside the rubber will introduce the static electri. The copper wire is also shortened with the wear of the rubber. when the car is stopped and the rubber part is not in contact with the ground, the electrostatic tape needs to be replaced. colour:black Material:rubber size:Length:About 32cm Width: About 6.3cm Package Contents: 1 x Car Static Elimination Belt.The copper wire is also shortened with the wear of the rubber. there is no need to worry about this. the rubber Presses the ground, and the copper wire inside the rubber will introduce the static electri.
