ITEM NAME:Car Auto Bridge Puller Lifter Body Panel Dent Pit Repair Removal Tool Kit New FD Descriptio n Material: aluminum alloy Color: picture color Size: 15*5*3cm Weight: 0.265kg Use steps: 1. Clean the concave surface. 2. The glue stick is inserted into the high-performance glue gun, and then plugged in and heated. After a few minutes, the glue stick will drip down. The working temperature of the glue gun is about 165~200 degrees. Please pay special attention to safety and keep away from children when using high temperature glue gun. 3. Depending on your body sheet metal depression, select the size to apply the gasket, and apply the gasket at a time to determine your choice size. 4. Use a heated glue gun to evenly squeeze the opened glue stick onto the surface of the gasket and quickly place it slightly in the recess for 3 minutes. Note: Do not apply pressure when placed slightly in the recess. After use, the gasket can be reused after cleaning. Do not discard! 5. Use the balance bridge. In the operation according to your recess size adjustment, the force must be slowly adjusted until the recess is completely flattened and restored. 6. Spray the debonder at the bonding point of the gasket and the super-treatment glue and gently remove the residual super-treatment glue with the film. Note: Repeat the inspection of the depression to repeat the steps 3-4-5, it is important to completely complete the depression. 7. Wipe the surface clean and almost invisible after repairing Product list: car sag repair kit We offer you what you need! Car Auto Bridge Puller Lifter Body Panel Dent Pit Repair Removal Tool Kit New.Use the balance bridge. Use a heated glue gun to evenly squeeze the opened glue stick onto the surface of the gasket and quickly place it slightly in the recess for 3 minutes. Note: Do not apply pressure when placed slightly in the recess.
