ITEM NAME:Car Rear View Reverse Backup Camera Rearview Parking for Chevrolet Epica/Lo G7W2 Car Rear View Reverse Backup Camera Rearview Parking for Chevrolet Epica/Lo G7W2 The CCD digital fill light image sensor is specially designed for the rear view of the car. It uses digital fill light and software technology to make the daytime image clear and the night low illumination. 170 ° large viewing range, safer reversing.-30 ° C to +60 ° C temperature range, fully in line with automotive environment applications.With reversing reference line (electronic ruler line), the obstacle distance is clear at a glance Digital sensor chip processing, the night vision effect is obvious.Factory tested by high-pressure water immersion test and 12-hour power-on aging test, multi-layer waterproof design, truly high-pressure rinsing and immersion waterproof Installed at the rear handle and license plate light, with self-tapping screws The video cable is connected to the monitor, and the power cable is connected to the power supply of the taillight of the car. When the vehicle is reversed, the reversing monitoring system automatically starts working, and the situation behind the car can be clearly seen. All cameras will be checked before being sent to you. Image sensors: 1/4 inch color CCD-matrix TV system: NTSC and PAL Effective pixels: 720*540 Resolution: 520 TV-lines Video output: 1.0Vp-p, 75 Electronic shutter: 1/60 (NTSC) -1 / 10000s, 1/50 (PAL) -1 / 10000s Waterproof Class: IPX 67 Operating temperature: -20 ° C ~ + 80 ° C RH95% Working power (DCV): 12 Current consumption: 90 mA max Installation: 1. Install the camera in the license area of ??your car plate 2. Adjust the lens of the camera to your best position. 3. Connect the power cord (red and black) to the headlight wiring of the power cables of your car. 4. Connect the video output (yellow wire) to the display. About the car's rearview camera system: Usually most monitors support both NTSC
