ITEM NAME:Car Scratched Broken Rear Window Defogger Grid Line Repair Kit DIY Tools+Cloth Product Description Description: DIY Car Rear Window Defogger Repair Kit for Scratched Broken Defroster Heater Grid Lines Descriptions: This kit is designed to repair scratched or broken rear window defogger grid lines. Surfaces to be adhered must be smooth and flat. Repairs can be made ideally at temperatures from (10 Celsius to 24 Celsius). It provides a low-cost, high-quality repair for damaged rear window defogger grids and tabs. Features: 1.Used to repair scratched or broken rear window defogger grid lines. 2.Make Permanent, Invisible repairs. 3.Fix quickly and easily with a cheap cost. 4.Glue is specially formulated to conduct electricity. 5.Make Permanent, Invisible repairs. 6.Follow the instructions easily by step. Instruction: Step1. Determine which grid line is broken and where the repairs need to be made, turn off the rear defogger, Clean the surface of the glass with cloth. Step 2. Carefully place the masking tapes over the broken area of the grid, Make sure to align both ends of the broken line with the masking tapes. Make sure there is a good seal between the window and the masking tapes. Press the masking tapes against the glass and make sure that all air bubbles are removed. Step 3. Apply the silver repair compound over the top of the masking tapes with the cotton swabs provided.To avoid solid material remains on the bottom or sides of the bottle, Stir the silver repair compound with cotton swabs before use, Step 4. Use plastic scraper to make the surfaces smooth and flat. Make sure that the silver repair compound overlaps with both ends of the broken line. Look through the window from the inside; there should be no light showing through the repaired area. If light shows through, apply another coat of repair compound. Step 5. Remove the masking tapes immediately. Step 6. After removed the masking tapes, dry the silver repair compound.(A). Curing within 15-20m.This kit is designed to repair scratched or broken rear window defogger grid lines. Surfaces to be adhered must be smooth and flat. Repairs can be made ideally at temperatures from (10 Celsius to 24 Celsius).
