ITEM NAME:CS-054B1 12V Motorcycle Handlebar Electric Heated Grip Pad Kit Hand Warmer A#S Product Description Description: CS-054B1 12V Universal Motorcycle Motorbike Handlebar Electric Heated Grip Pad Kit Winter Hand Warmer Feature: 1. Simple modification method, non-destructive appearance, convenient and simple installation 2. Using PET metal heating film, the heating speed is very fast, it can heat up in a few seconds, safe and fast 3. With a three-temperature adjustment switch, you can adjust the high and low temperature at will according to your needs, and the design is very user-friendly 4. The switch is designed to be directly installed on the rear-view mirror base, no need to drill holes, no damage, very simple 5. DC 12V input, suitable for all motorcycles, with a very wide range of applications Specification: Product model: CS-054B1 Product net weight: 75g Product gross weight: 82g Product material: PET metal heating film Product size: Length: 9.5cm/3.74"; Width: 8cm/3.15" Input voltage: 12V Product power: 10W (one side), 20W (both sides) Temperature: low temperature: 30℃; high temperature 50℃~60℃ Switch type: waterproof and dustproof rocker switch Applicable model: all 12V motorcycle models Installation method: 1. Put the heating element on the handlebar and adjust it to the proper position 2. Use tape to evenly fix (wrap) the electric heating sheet to the handlebar, especially the wiring of the electric heating sheet should be tightly wound 3. Put on the pads, adjust the position, use a heat gun (you can also use a lighter or a hair dryer) to blow the two creases of the outer sleeve longitudinally symmetrically until the shrinkage is uniform, and then blow other parts evenly until the outer sleeve All parts shrink evenly and flat 4. The switch is installed under the rearview mirror rod 5. Connect the power cord, no negative/positive difference, but it must be connected to the lower output line of the electric door lock (where the key is inserted) Note: 1. .Use tape to evenly fix (wrap) the electric heating sheet to the handlebar, especially the wiring of the electric heating sheet should be tightly wound. Included: 1 Set X Heated Handlebar Grip Pads. DC 12V input, suitable for all motorcycles, with a very wide range of applications.
