ITEM NAME:DC 12V 1 Channel Wireless Relay Remote Control Switch Receiver With TransmitteME Specification: Wireless Remote Control Material: ABS Plastic Battery:23A Battery (not included) Operating voltage: 12V Frequency: 433MHZ Current job: 9 ~ 12mA Transmitting power: 10-15mw Frequency deviation: ± 0.2MHz Size (approx.): 58x38x15 (mm) (LxWxH) Suitable for all lights. Easy to install and simple to use. Energy-saving and environment protection Fast response and long control distance. Application: Garage Door, Household Electrical Appliances, RGB lights Stable performance and strong to resist interference, not obstructed by walls and furniture! Reference distance: 150 meters (This is the theory distance in open environment without interference, practical application due to the interference environment and decreased) Characteristic: Double control(wall switch function and control function),safety(the shell applies to the fire-retardant material),easy installation(just wire connection) 1 Channel Wireless Relay Switch Channel: 1CH Output Current: 10A Input Voltage: DC10-14V Working Voltage: DC12V Standby Current: ＜5MA RF Frequency: 433MHZ Receiver Sensitivity: >90dBm Dimension (approx.):3.5*3*1.6cm RF Working mode: Super heterodyne receiver Remote Control Distance: >100 meter(In open environment) Decoding Way: MCU Software decoding Can store the number of remote control:50 Support remote control type: Fixed code, learning code Wiring Method: Fixed wiring terminal Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC Output: Normally open, Common, Normally closed Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched) Working/output way: Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control. Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remot.Frequency deviation: ± 0.2MHz. Jog/Non-Latched: Press one button is Working /ON. 1 Channel Wireless Relay Switch. RF Working mode: Super heterodyne receiver. 1x 1 Channel Wireless Relay Switch. Current job: 9 ~ 12mA.
