ITEM NAME:DC-AC Power Step-up 12V to 110V 220V Inverter Board 150W Converter Transformer Product Description Description: DC-AC Power Step-up 12V to 110V 220V Inverter Boost Board 150W Converter Transformer DC-AC Converter Input 12V to Output 110V 200V 220V AC 150W Inverter Boost Board Transformer Specifications: Material: Electrical components Color: As pictures Power: 150W Input voltage: DC12V Output voltage: AC 0-110V-172V-200V-220V Quiescent current: about 0.05A Output waveform: high frequency square wave Output frequency: about 20KHZ Protection: none Output wiring the following voltages: V0--V2=110V V0--V3=175V V0--V4=200V V0--V5=220V V5--V4=20V V5--V3=45V V5--V2=110V V4--V3=28V V4--V2=90V V3--V2=62V Warm Tips: 1. The board belongs to high frequency square AC output; it is not suitable for the inductive appliance, such as motor, fan and coil transformer. 2. While picked up with low-load machines (LED light, mobile phone charger and DVD set-top box), you are suggested to pick up with low voltage point, such as: 172V/110V. 3. You should install a large heat sink to release its long time high-load (≠¥100W) work. 4. You could not connect the power inversely. Besides, power supply and power wire should have large enough current. 5. Do not overload and short-circuit because it without any protections. 6. The number in measured by the output high frequency non-load voltage meter will be a little higher. Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding. Included: 1 x DC-AC Converter Boost Board Transformer.Power: 150W. V0--V5=220V. V0--V2=110V. V5--V2=110V. Output waveform: high frequency square wave. Output frequency: about 20KHZ. You could not connect the power inversely. Due to the different display and different light, the picture may not show the actual color of the item.
