ITEM NAME:Diy Hexagon Mold 2 Pack Diy Silicone Coaster Molds, Hexagon Coaster Silicon Y7B3 Diy Hexagon Mold 2 Pack Diy Silicone Coaster Molds, Hexagon Coaster Silicon Y7B3 DIY Hexagon Mold Application - Perfect for making decorative resin crafts such as coaster, beverage coaster, bowl mat etc. Hexagon Coaster Silicone Mold gives you more advanced beaut. Easy to De-mold: Smooth interior makes it easy to de-mold after it's fully cured and reduces the need to cut back and polish. Or you can use release spray or soap water which may help extend silicone mold's life. Reuse without deformation -superior high tear strength, etc. After squeezing and deforming, just rest for a while and then will return to thestate. safety, high Flexible, full transparency, Super easy to de-mold The mold is used to create square coaster, beverage coaster, bowl mat etc, Mold is reusable.There are not super soft, Bottom bracket prevents deformation, the bottom of the middle is not easy to bend How to make: Pour resin into measurement cup, slowly stir to release bubbles. Adding glitter or pigment into it if you need. Then pour it into your mold and slowly stir. Allow to stand for 24 hours and take it out. colour:transparent white Material:Silica gel size:12*11cm Package Contents: 2*Hexagon Silicone Mold Warm Tips: How to clean: You can wash it with warm water and soap or rubbing alcohol, then use a soft cloth to wipe clean. Do not use solvents to clean your mold. How to store: Please store the resin silicone molds away from direct sunlight and dust. How to de-mold: You can use a mold release spray, a baby wipe or a drop of soap mix with a bit of water as a release agent, work it down to the mold, then push the project from the bottom. Please make sure your resin piece is fully cured.
