ITEM NAME:DT9205 Protection Digital Multimeter Ammeter Current Capacitance Tester #gib Product Description Description: DT9205 Protection Digital Multimeter Ammeter Current Capacitance Tester Specifications: Range: ACV AC voltage: 200mV, 2V, 20V, 200V, 750V DCV DC voltage: 200mV, 2V, 20V, 200V, 1000V ACA AC current: 2mA, 20mA, 200mA, 20A DCA DC current:20uA, 200uA, 2mA, 20mA, 200mA, 20A Resistance:200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ, 200MΩ, 2000MΩ Capacitors: 2nF, 20nF, 200nF, 2uF, 20uF, 200uF Power supply: 9V, 6F22 Maximum display:1999 Features: Test of crystal pole tube Diode Testing Turn-on buzzer Not Automatic shutdown CMOS integrated circuits, dual integration principle A / D conversion, automatic zero calibration, automatic polarity selection, overrange instructions. LCD screen with high contrast 70 x 40mm/2.76" x 1.57"large screen, the word up to 25mm/0.98". Depending on the viewing position, the display screen has a viewing angle of about 70 ° to achieve the best viewing effect. Attentions: The multimeter is the precision electronic instruments, do not arbitrarily change the internal circuit to avoid damage. 1.Do not receive more than 1000V DC or RMS 750V AC above the voltage up. 2.Do not accidentally take the range to avoid damage to the external circuit. 3.Using it after the instrument cover well 4.Turning off the power before you replace the battery and fuse to be in the pen. Unscrew the rear cover screw, gently lift the back cover slightly and push the cover forward, so that the cover on the back cover is removed from the instrum ent case. Replace the battery and fuse according to the specifications on the back cover. Included: 1 X DT9205 Digital Multimeter 2 X Table Line 1 X Chinese Manual.Turning off the power before you replace the battery and fuse to be in the pen. Unscrew the rear cover screw, gently lift the back cover slightly and push the cover forward, so that the cover on the back cover is removed from the instrum ent case.
