ITEM NAME:ELM327 USB Diagnostic Cable With Switch For Code Reader Focccus Forscan FF2 A3A7 ELM327 USB Diagnostic Cable With Switch For Code Reader Focccus Forscan FF2 A3A7 Technical Details: 1.Latest ELM327 version for greater ford compatibility.2.Manufactured modification to include a switch to connect to different CAN buses.3.Designed for FORScan software 4.Compatible with software venders; FORScan, Elmconfig, FF2 and FoCCCus, plus more.5.MS CAN bus and HS CAN bus support.6.Drivers and instructions included Introduction:One ELM327 OBDII OBD2 USB with switch. Designed for communicating with Ford, Mazda, Lincoln and Mercury vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327. Basic Features: Reset fault /trouble codes / parameter ids (PIDs) Change car configuration data Run tests Services procedures Program certain models Pin Configurations: Switch position one: HS CAN - Occupies pins 6 and 14 Switch position two: MS CAN - Occupies pins 3 and 11 Supported Software: FORScan Elmconfig FoCCCus FF2 Plus more Modified EML: Please note that many Ford and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus. ELM327 supports HS CAN from the stock, because For.d HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11. Supported Vehicles: All For.d, Mazda, Lincoln, Mercury vehicles that can be addressed using an ELM via an OBDII connector. On 17-Jan-20 at 14:04:36 GMT, seller added the following
