Product Description:
This is a new home irrigation water garden Timer controller; You can configure the program according to your needs.
Features:
-100% brand new and high quality
-This timer irrigation should be used only for control of irrigation systems in the domestic sector, for example, lawn sprinklers, sprinklers and drip home, etc.
Specification:
Water connection: G3 / 4 Faucet thread
Hose connection: 15 mm (1/2 ) - suitable for all known systems plug-in
Water pressure: 0.5- 4kgs
Water temperature: 0- 40 degrees
medium irrigation: fresh clear water
Batteries: 2x1.5 V AAA batteries (not included)
Package includes:
1 X Garden Irrigation Controller (batteries not included)
Note: Vertical mounting, because there is a bottom vents, if into the rain will lose the ability to work.
Micro-controller apply for range:
Micro-controller is apply for irrigation in small garden.
top floor and balcony,especially in dry weather.
Technical data:
Medium liquid: Water
Temperature range: 0-40degree
Work pressure: 0.5-4kgs
Frequency(irrigation): can be control by whirl button. Minimum of Irrigation time is 1hour. Maximum is one week
Water time(irrigation): can be control by whirl button. Minimum of circle time is 1 minute. Maximum is 120minutes.
Power: 3V,NO.7 battery with 2pcs
Use method: First,install the battery. the water valve will be self-check. Then ball valve will be turn to close status.
Second,you can turn the B button to the cycle time that you are need.
Third,turn the A button to a number that will be continuous irrigation.
Forth,according to the programs set. The water valve will be operate within 10 seconds.
ATTENTION:
One: You set up the time,but the time should more than output time.
Two: If B button under the "0"Reset number,the water valve will be work once.
Three: If A button under the "OFF" the water valve will be closed.
Details pictures:
