EU Plug 45-IN-1 Electric Solder Iron Wood Burning Pen Set +Digital Multimeter
Save 0
SKU: U2I-BG-1457710
Share this product
Description
Feature - Used to engrave on materials such as wood, cork, soldering. - Lightweight and small burning pen perform well in woodcarving, wood embossing, and soldering, and you will feel no fatigue after long hours operating. - Built-in temperature control knob, adjustable from 200-450°C for high precision operation. - The temperature can be preset within the effective range and automatically keep the temperature constant. Easy to operate. - Fast heating. Power on for 10 seconds, you can achieve rapid temperature rise until the set temperature. - Comes with a storage bag for daily carrying.
Specifications: Power voltage: AC 220V±10% 50Hz Input Power: 60W Temperature range: 200℃~450℃ Heating up time: ≤15s Temperature control accuracy: ±2℃ (No-load condition) Specification of welding Tsui: ∮6.4(Outer), ∮4.0(Inner) Heating element: The ceramic heating core of the printed circuit Insulation resistance: ≥100MΩ Length of burning pen: 22cm (with 130cm cord) Plug: EU Plug (Distribute the adapter according to your country.)
Name: AC/DC Digital Multimeter Specifications: Color: Orange & Black Dimension: 108×65×34mm DC voltage: 200mV/2V/20V/200V/600V +/-(0.8%+3) AC voltage: 200V/600V +/-(1.5%+10) DC current: 200uA/2mA/20mA/200mA/10A +/-(2.0%+3) Resistance : 200/2K/20K/200K/2M ohm +/-(1.0%+3) Feature: - Backlit LCD display. - The function selection has 32 measuring ranges. - Full range overload protection. - Powered by 1*6F22 9V battery (included) Package included: 1 x Digital AC/DC Multimeter; 2 x Test Leads Lines (Red&Black)
Using & maintenance method: 1. Don't throw off tin for fear of affecting the life of the heating element. 2. When the solder horn oxidizes, clean with fiber sponge instead of embellishing with a file. 3. After welding, please wash and clean the solder horn and smear tin for fear of oxidation. If only the operation of cleaning surface of solder horn is carried out, however, the tin isn’t immediately removed, the tin will never be smeared when the surface of solder horn oxidizes to become black. 4. After the operation of tin-welding, please pull the plug out and wait for the temperature falling slowly until cooling naturally, Don't dip with water to be cold for fear of outage or electric leakage of the heating element. 5. When the users are using the scaling powder, pay more attention to: If there exists oxide on the solder horn, please do not put the solder horn into the scaling powder (tin water) and clean. As the white acid gas produced after the scaling powder is heated could destroy the inside of the tubular electric heating element. Additionally, the scaling powder, as the acid gas, could corrode the alloy layer on the surface of solder horn and consequently shorten the service life of soldering iron. The correct methods are: ① Prepare a piece of sponge or cotton cloth soaked, wash and clean the solder horn with oxide above. ② Wash and clean the scaling powder on the surface of the sponge or cotton cloth every day so as to be used again.
Package included: 1 x Pyrography Wood Burning Pen 15 x Wood Embossing Tips 18 x Burning and Soldering Tips 4 x Plastic Stencils (Numbers, letters, basic symbols & graphics) 2 x Pencil 2 x Blade 2 x Hot K nife Chuck 1 x Bracket 1 x Carrying Bag or 1 x AC/DC Digital Multimeter (Comes with test leads/probe cables)
Also Purchased
Recently viewed
Free delivery
Providing Free Delivery Across India
Satisfied or refunded
Don't Like It ? No Worries , We will take it Back.
Top-notch support
Any Queries, Contact us Anytime at Support@shop2india.com
