ITEM NAME:Flame Gas Torch But Butane Torch Burner Welding Soldering Camping Flame Gun A#S Product Description Description: Flame Gas Torch Flamethrower Butane Torch Burner Welding Soldering Gas Stove Outdoor Camping Fire Flame Gun Use instructions: Welding torch assembly: 1. Turn the control knob to the "CLOSE" position 2. When changing or reconnecting the gas cylinder, stay outdoors or away from others. 3. Adjust the gas cylinder collar slit to match the positioning label of the torch, and gently press it vertically and turn it to the right by 35 degrees. 4. Make sure there is no gas leakage. If there is gas leaking (by smelling it), immediately take it to outdoor ventilated places, find the flame and close the leak; if you want to check other leaks, please go to the outdoor ventilated place, use soapy water to detect Whether it is leaking. Must not use flame to detect. 5. Ignition (use an open flame to ignite): Turn the knob to "open" place, then set fire to the flame. Use: 1. Now it is ready to use. Adjust the flame size between "OPEN" and "CLOSE" as needed. 2. During the two-minute warm-up period, watch out for swaying flame; and the angle of the torch perpendicular to the ground should not exceed 15 degrees, otherwise the flame sway will occur. 3. After two minutes of warm-up, the torch can be use freely at any angle, keep the label facing up to reduce flame instability. Shut down: 1. Turn the control knob to "close" to turn off the gas. 2. After use, separate torch and gas cylinder. After use: 1. Check if the torch is clean and dry. 2. Store the separate torch and gas cylinder in a cool, well-ventilated area, and cover it with the cover. Specifications: Product weight: 120g Fuel consumption rate: 120g/hr Material: copper plated barrel, aluminum middle tube (white/yellow random color), zinc alloy connector, plastic switch Ignition method: after turning on the yellow knob, when hear the sound of gas coming out, use an open flame to ignite it. (Note: do not point.Welding torch assembly: 1. Make sure there is no gas leakage. Adjust the gas cylinder collar slit to match the positioning label of the torch, and gently press it vertically and turn it to the right by 35 degrees.
