ITEM NAME:For Volkswagen T4 Transporter Caravelle Multivan - Clutch Pedal Repair Brac W1L9 For Volkswagen T4 Transporter Caravelle Multivan - Clutch Pedal Repair Brac W1L9 Fitting Guide :Under your bonnet, locate your brake servo unit (the big round unit below the brake master cylinder and brake fluid reservoir) Remove the M8 bolt (13mm head) from the lower right side of your brake servo (approx. 4-5 ‘o’ clock position as you looking at it) and replace it with the longest of the three M8 bolts supplied along with the largest M8 washer. Tighten this bolt now. In the drivers footwell, locate your clutch master cylinder (in between the clutch and brake pedal) and remove the two M8 mounting bolts (13mm heads) Place your new clutch pedal bracket into position (ensure it goes over the protruding bulkhead bolt you first fitted) and loosely fit the bracket to the clutch master cylinder, using the two remaining M8 bolts and small M8 washers supplied with your new bracket. Now fit the other small M8 washer and the M8 nyloc nut to the bulkhead bolt and tighten. Now tighten the two clutch master cylinder bolts. colour:Black + silver Material:metal Package Contents: 1 * bracket 3 * screws 1 * screw ring 4 * gaskets.Place your new clutch pedal bracket into position (ensure it goes over the protruding bulkhead bolt you first fitted) and loosely fit the bracket to the clutch master cylinder, using the two remaining M8 bolts and small M8 washers supplied with your new bracket.
