ITEM NAME:Hand Tool Electronic Work Wire Decrustation Pliers With Power Drill Electri G5D8 Hand Tool Electronic Work Wire Decrustation Pliers With Power Drill Electri G5D8 Prepare the hand drill and attach the liner to the hand drill Insert the three strands of the parallel thread separately, fix the tail end with a vise, and fit the threader and the vise as much as possible, and the three wires must be clamped. If not clamped, it will affect the joining effect. Start the electric drill to start the electric drill, and slowly rotate the aligner. During the rotation, the aligner should be pressed firmly in the direction of the vise. When the winding is completed, the aligner can be loosened and the thread is removed. Manually parallel: 1. Measure the length of the strip to be stripped 2. Place a good amount of wire into the corresponding hole and clamp it with a vise 3. Press the parallelizer in the direction of the arrow to rotate and parallel 4. Parallel completion Tips: 1. Pliers clamp the wires, the wires need to be parallel to one row, and clamped with force 2. The pliers are in close contact with the parallelizer Improving Work Efficiency: The wire twisting tool can twist and stripe wire simultaneously, it can help increase productivity and prevent sore fingers and cramping hands. NOTE: Always Turn off breakers before working on electrical systems Easy Operation: The wire connector tool with 3/8 inch hex shank can be attached to impact driver and power drill for easy operation, helps alleviate repetitive motion injuries The wire connector tool can not only be used with power drill, but can use manually. Two screwdriver bits included for manual twisting and stripping wire style:2.5 level colour:Silver Material:Cemented car
