ITEM NAME:LED Controller with Touch-Radio DC12-24V 2.4G Remote Control for RGBW Strip A4D6 LED Controller with Touch-Radio DC12-24V 2.4G Remote Control for RGBW Strip A4D6 Measurements of the remote control: UE10 x 54 mm Dimensions of Controller: 85 x 45 x 22 mm Input voltage from the controller: DC ue2-24V Max. Load of each channel: 6A Remote Control Battery: 2 x AAA (not included) Specific operating instructions are as follows: Pairing: Only after successful mating the controller and remote control, it can function properly. After confirming the normal connection between the controller, LED load and network connection, turn off the power, and then turn the product on again. Then press once "+ speed" within 3 seconds after the connection, now the loaded LED lamp will flash twice slowly, which means that the pairing is successful, and the system can be used by the controller normally. After the code eliminating are the controller and the remote control in the initial state, in this case the re-pairing is needed: After confirming the normal connection between the controller, LED load and network connection, turn off the power, and then turn the product on again. Then press "+ speed" within 3 seconds after the connection, now the loaded LED lamp will flash nine times quickly, which means that the code eliminating succeed. Note: If the connected LED strips with R / G / B / W / V + connector is fitted, the white may appear normal; If it's with R / G / B / V +, the white can not be displayed. When it with bright white light, the LED strips can not be displayed. Package content: 1 x Remote Control 1 x Controller 1 x English User Manual Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
