ITEM NAME:Magnetic Camber Alignment Gauge Adjustable Positioning Magnetic Level Features: Magnetic Gauge Tool measures the Camber and Caster angle on the wheel hub or brake disc. Suitable for accurate checking of the castor and camber angle. Has a simple leveling adjustment from -5 degrees to 5 degrees. Magnetic gauge attaches to the hub or disc brake. Allows adjustment to maintain correct wheel alignment and even tyre wear. Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Easy to read and convenient to operate. Instructions for use: 1. Remove the four-wheel positioning sensor (clamp) and remove the tire; 2. Carefully suck the magnetic level on the side of the brake wheel; 3. Adjust the level to zero; 4. Install the required positioning special parts; 5. Use special tools and adjust the positioning angle to the required measuring angle with the help of the magnetic level indicator. 6. Re-test with a locator. If a small deviation is found, just fine-tune the bottom of the car. (Generally, a little deviation will not cause positioning failure). Instructions: 1. Remove the four-wheel positioning sensor (clamp) and remove the tire; 2. Carefully suck the magnetic level on the side of the brake wheel; 3. Adjust the level to zero; 4. Install the required positioning special parts; 5. Use special tools and adjust the positioning angle to the required measuring angle with the help of the magnetic level indicator. 6. Re-test with a locator. If a small deviation is found, just fine-tune the bottom of the car. (Generally, a small deviation will not cause positioning failure) Specifications: Material: steel Blister Number: 5 Detect range: 1.5mm Detect Accuracy: 99 Color: Silver (as pictures show) Dimensions: approx.12.4x3x2cm Package contents: 1 * Magnetic Gauge Tool.Suitable for accurate checking of the castor and camber angle. Remove the four-wheel positioning sensor (clamp) and remove the tire;. Install the required positioning special parts;. Re-test with a locator.
