ITEM NAME:Mini 3 Modes Digital Servo/ESC Consistency Tester Steering Gear Measurement V7E5 Mini 3 Modes Digital Servo/ESC Consistency Tester Steering Gear Measurement V7E5 Test Together: can be synchronized output control 4 servos. Accurate Test: used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes. PPM Signal: with PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, frequency 50Hz. Adjustable:rotary potentiometers to decrease or increase the width of the output pulse. 3 Modes:S-1 manual mode (Manual)/S-2-bit mode (Neutral)/S-3 automatic mode (Automatic) Mini 3 Modes Digital Servo/ESC Consistency Tester Steering Gear Measurement for RC Helicopter Airplane Car Tool Steering gear tester 1.This Digital Servo Tester is with high accuracy. 2.You can test control 4 servos at the same time and change the test modes as you need. 3.With rotary potentiometers, you can decrease or increase the width of the output pulse. colour:black Material:ABS size:40*75*25MM Package Contents: 1* servo tester Notice: Carefully read the before any use, if you are a beginner, it/'s advisable to be assisted by an experienced adult..PPM Signal: with PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, frequency 50Hz.
