Specification:
Material: PU Line
Color: Black
Faucet connector: 3/4"
Length of line: 8m
Features:
☛ Great for cooling your outdoor living areas.
☛ Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog
☛ No air assistance is required, the system is simple, the spray point is fine, the atomization is sufficient, energy and water saving, low cost and good effect
※ Scope of application
1. Wetting and descaling 2, air humidification 3, chemical treatment 4, chemical spraying 5, liquid spraying 6, toba cco leaf humidification 7, tablet coating 8, flue gas evaporative cooling 9, sterilization 10, component cooling 11, fruit spray Wax 12, tile glazing 13, plant humidification 14, salt spray test 15, artificial fog 16, humidification in other places, etc.
※ Installation Steps:
1.Connect the adapter to the water tap.
2.Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.
3.Using cable tie to fixed the pipe.
4.Turn on the tap slightly until jets are working, enjoy the cooling misting system.
5.Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.
Package included:
1x 8M Line
11x Brass with Stainless Nozzles(2 for Spare)
9x Splitter
9x Cable Ties
1 x White plastic ring
