MKSSGEN L V1.0:
Description of details:
MKS- SGen L is a very powerful 3D printer ARM motherboard, using a 32-bit Cortex-M3 LPC1768 processor, clocked at up to 100MHZ, and the processing power is very stable. Compatible with Smoothieware and Marlin 2.0 firmware for a variety of needs. It is powerful and can be used with a variety of drivers. It can support external and in-line mode, and the in-line driver is compatible with various modes of special drivers (UART, SPI, etc.). It is compatible with various LCD screens and MKS series touch screens. It is a versatile and cost-effective motherboard.
Features:
1. Using 32-bit Cortex-M3 LPC 1768 master chip, 100MHZ frequency, strong computing power, performance greatly improved.
2. It has both an in-line drive socket and an external drive port, which is more expandable and more selective.
3. Compatible with a variety of drivers and special modes (the UART mode of the TMC2208, the SPI mode of the TMC2130, etc.) has a dedicated port reservation, and the wiring settings are more concise and convenient.
4. Support a variety of open-source firmware, continue the original s series motherboard with the smoothieware firmware, SGen-L can also support the marlin2.0 version of the firmware
5. High-quality circuit boards are used, and the corresponding pins of each interface are marked with silkscreen, which makes it easier to identify and modify.
6. Use dedicated power chip to support 12V-24V power input.
7. Support LCD 12864, MINI12864 and other control panels for display control.
8. It can be used with all touch screens of MKSTFT.
Parameters:
- Motherboard model: MKSSGEN _L
- Mounting hole size: 102mmX 76mm
- Appearance size: 110mm* 84mm
- Microprocessor: 32-bit Cortex M3 (LPC 1768/100Mhz)
- Input voltage: 12V~24V
- Motor Driver: TMC2130/2208/2100, 4988/8825
- Temperature sensor interface: NTC100K/PT100
- Display: Support MKS TFT series screen and LCD screen
- Support for print file format: G-code
- Recommended software Cura/Simplify3d/Pronterface/Repetier-Host
- Firmware update: TF card update
- Support machine structure: XYZ/Kossel/Ultimaker/Corey etc. 3D Printer
A4988 Description:
Parameters:
- Dimensions: 1.5mmX2mm (for RAMPS, Ultimaker or other compatible boards);
- Driven current: 1A (preferably the heat sink is installed, the heat sink will be attached, you need to install it yourself)
- Manufacturing process: SMT placement machine manufacturing, non-manual welding, higher yield, more stable performance
Suitable for:
- Need to drive the stepper motor.
- It is a necessary module for building 3d printers, CNC, engraving machines, etc.
- Supported 3d printers are Prusa Mendel, Ultimaker, Printbot, MakerBot and so on.
- Can refer to the following code to directly drive the motor
Package Included:
1 x MKSSGEN L V1.0
