ITEM NAME:MPL3115A2 Intelligent Temperature Barometric Pressure Altitude Sensor Module Description: - A pressure sensor that provides Altitude data within 30cm (with oversampling enabled). - The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface with most controllers. - Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. - The device also provides 12-bit temperature measurements in degrees Celsius. - This breakout board makes it easy to be prototype using this tiny device by breaking out the necessary pins to a standard 0.1 inch spaced header. - The board also has all of the passive components needed to get the device functioning, so you can simply connect it to something that talks I2C and get to work! Specification: - Demension : 17mm*15mm*3mm - Absolute pressure measuring range: 20 to 110 kPa - Relative accuracy: + / - 0.05 kPa - Effective resolution: 1.5 Pa / 0.3 m - Operating temperature range: - 40 to 85 degree C - Power supply voltage: 1.95 to 3.6 V - I/O power supply voltage: 1.62 to 3.6 V - I2C digital output interface - Two programmable interrupt pin - Built-in 32 samples FIFO buffer - Power consumption: standby mode 2 mu A; low power consumption modes 8.5 mu A, 1 hz sampling - Already compensated data output: 20 pressure data, Pascal; 20 height data output unit, output unit meter; 12 temperature data, output unit degree c Package Included: 1 x Clock Module 1 x Clock Pin.Built-in 32 samples FIFO buffer. - I2C digital output interface. 1 x Clock Module. - Effective resolution: 1.5 Pa / 0.3 m. - Power consumption: standby mode 2 mu A; low power consumption modes 8.5 mu A, 1 hz sampling.
