ITEM NAME:New 3.5 Inch Ide To Sata 4 Pins Hard Drive Convertor Hdd Parallel To Serial H6R1 New 3.5 Inch Ide To Sata 4 Pins Hard Drive Convertor Hdd Parallel To Serial H6R1 Compatible with all brands of desktops: The video recorder IDE hard drive to SATA, connected to the motherboard SATA port. 3.5-inch IDE hard drive to SATA, connect to the motherboard SATA port. IDE drive to SATA, connect to the motherboard SATA port. IDE burner to SATA, connected to the motherboard SATA port You can transfer the desktop 3.5-inch IDE hard drive to the SATA recorder (please format the hard disk on the computer first). The transferred hard disk can be the master disk, slave disk (need to reinstall the system, refresh in the BIOSS, etc.). The transferred optical drive can guide the system. The adapter card supports up to 1000G capacity parallel port hard drive. The IDE device using the riser card must be inserted in the MASTER position. Compatible with SATA 1 generation, SATA 2 generation, SATA 3 generation. Plug and play, no need for any driver This paragraph does not support the motherboard IDE interface to SATA hard drive, etc., please pay attention to purchase. Product Name: IDE to SATA Adapter Card Color: color as shown Product size: 6*2.2CM Product village material: using pcb double-layer circuit board Scope of application: suitable for IDE optical drive, recorder, 3.5-inch hard drive, video recorder hard drive Compatible system: compatible with windowsXp\win7\win8 32-bit\64-bit system Products cannot be used with common faults: Check if the SATA data cable is a problem and see if it is loose. Or change to a normal SATA cable. Check if the jumper is on the main board and the value is in the MASTSER position. Set whether the BIOS is set to be correct. Some motherboards require BIOS settings (set SATA mode to IDE MODE) If it is not possible to use compatibility issues, there are a few devices with compatibility problems with such conversion cards. Compatibility is not reco.The video recorder IDE hard drive to SATA, connected to the motherboard SATA port. IDE drive to SATA, connect to the motherboard SATA port. IDE burner to SATA, connected to the motherboard SATA port.
