ITEM NAME:New Digital Satellite Signal Finder Meter With LCD Display for Sat Dish Description: Connect the Satellite Finder between the star receiver and the antenna LNB. Adjust the knob on the front panel of the finder so that the pointer on the dial points to the "5" position. Adjust the azimuth and elevation of the antenna. When the pointer is deflected to the maximum angle, adjust the knob on the front panel counterclockwise to attenuate the received signal and adjust the azimuth, elevation and polarization angle of LNB . Until the pointer of the Satellite Finder is no longer so far. Combined with the satellite receiver to determine whether the signal is the required star signal. If it is, remove the finder and reconnect the receiver with the LNB. If the received signal is not the desired star signal, repeat the above work. Satellite Finder is just an Auxiliary equipment,it is only a preliminary judgment whether the antenna direction exists in the presence of a star Specification: Size:Approx.110*60*33mm/4.33*2.36*1.3inch Frequency Range:950-2150MHz Input level Range:-40ï ½Å¾-10dBm Impedance:75ÃŽ © Insertion Loss:≠¤5.0dB Power Supply:13-18V DC Operating Temperature:0ï ½Å¾40℃ Package Includes: 1 Piece Satellite Finder 1 Piece User Manual.If it is, remove the finder and reconnect the receiver with the LNB. If the received signal is not the desired star signal, repeat the above work. Adjust the knob on the front panel of the finder so that the pointer on the dial points to the "5" position.
