Descriptions:
SIZE: length 45mm width 24mm thick 11mm does not contain USB port.
Input: QC2.0/QC3.0/FCP, or ordinary 9V2A power, must r'each 2A, part 1.67A or 1.5A will not do.
Output: VOOC/DASH, 3.3-5.1V, default 3.3A
Efficiency: about 95%
Ripple: less than 50mV
Usage method:
It is recommended to use qc2.0 or qc3.0 charger or mobile power supply or vehicle charger that supports 9V2A or more. If the current is not enough, it may not support and restart repeatedly.
After the converter is powered on, the indicator light flashes red, and a little while red often indicates that the power supply is supported; if it is always flashing red, it indicates that the power supply is not supported.
Flash phone can be plugged in at this time, it is strongly recommended to use the original charging line, using other lines may lead to the burning of the phone or cable, especially oppo phone should pay attention to this problem.
When the battery power is less than 60%, it will enter the flash charging mode. The blue light of the adapter will then appear.
When the mobile phone is full, it will enter the trickle and constant pressure. At this time, the adapter is red.
If the data line or communication error is removed, the indicator lights will flash several times and then turn red.
If you don't support your mobile phone, you can take a flashing light and send it to the shopkeeper, who can debug you and support your phone.
Package Includes:
1 x conventer
Details Pictures:
