ITEM NAME:PCM5102 DAC Decoder I2S Player Beyond ES9023 for Raspberry Pi O2R2 PCM5102 DAC Decoder I2S Player Beyond ES9023 for Raspberry Pi O2R2 Support I2S/left-justified signel directly input (can switch by hand) The maximum support 32 Bit 384K Sampling rate. Can setting two FLT filter mode (NOM normal mode or LOW Delay mode)-Need switch by hand. SNR: 112db. Distortion: -93db Directly output is 2.1V RMS audio voltage ,High frequency is pure ,Low frequency is satiation ,Beyond ES9023 PCB size: Approx. 5x5.5x2cm / 1.97x2.17x0.79 inch Power supply voltage: DC 5-10V (VCC to 5-10V, GND to GND) color: yellow Material: PCB Package Contents: 1 x PCM5102 Module Note: Do not connect the power supply reversely, or the board will be damaged. The voltage over 10V will damage the board. VCC and GND need to be connected with power supply,and the remaining GND LRCK DATA BCK should be connected with I2S signal input. (This board does not need to connect to the MCLK chip, PLL internal frequency rise, MCLK clock, much better than using asynchronous clock. The internal PLL rise frequency is only used to generate the internal MCLK clock and can not raise the audio sampling rate.) Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm..1 x PCM5102 Module. (This board does not need to connect to the MCLK chip, PLL internal frequency rise, MCLK clock, much better than using asynchronous clock. The internal PLL rise frequency is only used to generate the internal MCLK clock and can not raise the audio sampling rate.).
